The motherboard of a computer is the most important part of it. A computer does not show any symptom of life when its motherboard is facing issues. A failed motherboard is nothing but a useless computer. Read this article to know more about how to recover failure motherboard.
If a desktop begins to create issues, it can be understood by some warning signs. Here are some signs that a motherboard is developing problems:
A motherboard is generally the most critical piece of hardware due to its difficulty in diagnosis. It’s difficult because, in most cases, a person has to check on each piece of hardware that is connected to it. No real signs of failure are shown easily.
There are some basic troubleshooting procedures a person can run to determine if a motherboard is having issues.
The troubleshooting steps can be divided into two categories:
Let’s further look into this discussion to know more.
When a computer is still turning on and booting into the operating system, a person should, first, rule out the hardware components to ensure that those are not creating the signs of motherboard failure.
Is boot-time increasing highly?
Do you see blue screens/errors?
Files are taking too long to transfer?
Are you hearing sudden clicking or other noises?
If any of the questions answers yes, the hard drive may not be okay. You must run a proper diagnosis in Windows. You can run a diagnosis from the drive’s manufacturer.
Do graphics-intensive jobs show blue or unstable screens?
Is the display showing artifacts on the screen that was not there before?
If yes, the video card may be having some issues and needs further testing. You can look into a guide on video card failure signs and proceed with further troubleshooting.
If there is any issue with RAM, you will see some signs of failing and causing the system to error or becoming unstable.
In this case, running a diagnostic tool, for example, Memtest86 or Memtest86+ is needed for further troubleshooting.
CPU failure doesn’t occur commonly, still can be a reason for system instability. Downloading and running the Intel
Processor Diagnostic Tool is recommended to find out issues with the processor.
If it is an AMD processor, the AMD system monitor tool is recommended.
A failure or lack of power supply can instantly cause a system to become unstable and can also create damage to the other computer system components.
The proper power supply for the system and the supply’s voltages should be checked twice to ensure if they are operating in line with their rated output.
Some system instabilities can be easily fixed by a motherboard BIOS update, it works on new hardware well.
In many cases, some errors occur due to lack of cooling or there might be a cooling failure in the computer system. Due to overheating, system instability can occur.
If a computer does not run the POST test or even turn it on, it may be a case of hardware failure. In this case, the motherboard might still be working.
Some of the modern motherboards may have LEDs for each component. For example, if the RAM or CPU is not functioning, an LED near that specific component will indicate that there is a problem with a red light. Green means everything is working properly.
Carefully check some more things. Such as, if you remove the RAM and then turn on the computer, does it respond with error beeps? Though some modern motherboards no longer support beep codes.
In some cases, the power supply is not proper or insufficient. Just because the other parts are activated, it does not mean that the power supply is supplying sufficient power to the motherboard or other parts of the computer.
Two more quick tests can be performed.
The first test is to remove the battery and reset the board’s CMOS. The second is to run a test of the components outside the PC case.
After trying the diagnostic procedures mentioned above could not help, you may have to buy a new motherboard.
Data recovery from a dead motherboard is an easy process. Recovering the data is as easy as buying a new motherboard and putting the computer back together. You have to plug in your old hard drive, then you have to select it as the boot device in the BIOS settings. And eventually, all of the data will be there on bootup.
As an alternative, look for an adapter that can turn the hard drive into an external hard drive. Just plug the adapter into the other computer and, eventually, all of your data should be available.
A motherboard creates connections among different parts of a computer. Motherboard transmits signals to and from various peripherals including CPU, keyboard, mouse, monitor, and RAM et cetera.
A motherboard is the soul of a computer or laptop. No one can deny that. So it is the best option to know more about How to recover failure motherboard and take great care of the motherboard.
Computer Medic On Call is committed to bringing you the highest quality computer service available for all of your information and systems needs. Serving in Broward and West Palm Beach in Florida State for IT Support. Our experience provides us with the skills to offer a range of high quality computer services.